(OEM) W10820048 Whirlpool Suspension Rods

Save 2%

Price:
Sale price$79.99 Regular price$81.49

At a Glance

Will it fit my model?

Most-searched compatible models: MVWB400VQ

Checks your model against 50 compatible models. The list is also in the description below.

Description

Free standard shipping included!

Whirlpool Washer Suspension Rod Kit (set of 4), CONTAINS 4 RODS, 4 WASHERS, 4 BUSHINGS, 4 BALLS, 4 CAPS

Standard suspension rods for select washer model numbers, as listed below. 

Suspension rod are designed to reduce bounce and excessive movement to keep the washer in balance while running.

Replace rods if you have excessive movement causing the inner tub assembly to bounce off the sides or the washer has moved out of place during the cycle.

These Rods will replace-  280144, 8564009, 8566146, W10189077, AP5985113 and PS11723157.

These are standard suspension rods for around 50 Whirlpool models which include-

Compatible models (models that use part W10820048):

MVWB400VQ0 WTW6600SW0 MTW6300TQ0 MTW6400TQ0 MTW6500TQ0 MTW6600TB0 MTW6600TQ0 MTW6700TQ0 MVWB700VQ0 MVWB800VB0 MVWB800VQ0 MVWB800VU0 WTW6200SW0 WTW6200VW0 WTW6300SB0 WTW6300SG0 WTW6300SW0 WTW6400SW0 WTW6600SB0 WTW6600SG0 WTW6700TU1 WTW6700TW0 MTW6300TQ1 MTW6600TB1 MTW6600TQ1 MTW6700TQ1 WTW6200SW1 WTW6300SB1 WTW6300SG1 WTW6300SW1 WTW6400SW1 WTW6600SB1 WTW6600SG1 WTW6600SW1 WTW6700TU2 WTW6700TW1 WTW6200SW2 WTW6300SB2 WTW6300SG2 WTW6300SW2 WTW6400SW2 WTW6600SB2 WTW6600SG2 WTW6600SW2 WTW6700TW2 WTW6200SW3 WTW6400SW3 WTW6600SB3 WTW6600SG3 WTW6600SW3

Questions & answers

Is this the same as the W11130362 or W11217817 suspension rod kit?

No - those are different rod kits for other models. For example, WTW5000DW2 washers use W11130362 and MVWC465HW2 washers use W11217817. Contact us with your model number.

Does this kit come with suspension grease like Bounce-B-Gone?

No - this kit does not include grease. If you want the heavy suspension grease, order it separately.

Do I need new rods, or is the bouncing just the foam inserts?

In most cases the foam inserts, not the springs, cause the bouncing. On older washers the springs may have weakened over time, so replacing the rods is worthwhile.

My new rods make noise. What should I check?

Make sure every rod is fully seated, the washer is perfectly level and the load is evenly spread. Some noise can happen while new suspension settles in.

How do I check if it fits my washer?

Type your full model number into the fit checker on this page or find it in the compatible model list. Not listed? Contact us with your model number.

Will this fit a MVWB400VQ?

Yes - the MVWB400VQ is listed as a model that uses part W10820048.

Will this fit a WTW6600SW?

Yes - the WTW6600SW is listed as a model that uses part W10820048.

You may also like

Recently viewed