Samsung Refrigerator Icemaker Heater Kit BA-00090

Good news is there is no frost build-up since I replaced the ice maker, drain tube, insulated the seams with extreme cold rated foil tape, and installed the pan heater in the new ice maker. The bad news is it made one batch of ice and stopped. Reseting the ice and unplugging the refrigerator did not resolve. It’s like the water solenoid is not working or not getting the signal from the control board? Still troubleshooting…

Recieved quickly and in good shape. Have not installed it yet but will soon.

I got my part and one ice maker had been knocked around on delivery and broke off taps , I let them know and they sent another , got it I 2 days so I recommend, all parts worked fridge working great and the video s big help. Thank you all for help! You all did me right

So I waited to give this review in order to see how long it took for the ice maker to freeze. I was thrilled, I got 6 weeks without needing to defrost. And when it needed defrosting it wasn’t as bad as usual. I wasn’t complaining. Here’s the not so good part…after the thawing cycle (yes, with reset) the ice maker no longer makes ice. It stopped working. Not sure if the heater was too much for the FD cycle but there you have it. Good luck

Two thing’s I found after installing the defrost tape: I get water dripping from the ice maker under drain pan where the defrost tape goes. There water drips into the ice tray and turns the ice cubes into a large chunk of ice. Second, the wires from there defrost tape can get sucked into the ice maker and wrap around the ice ejector if you follow the instructions. I suggest first adding a strip of tape over the gap where you will run three wires from the back to the front of the unit to prevent the wires from slipping inside, then tapping the wires on top of the first strip.